​Feedersystemer

Brovind electronic controllers

From the new digital controllers with potentiometer (CB series) to the high-level digital series with frequency variation control (CFV series), since its creation Brovind develops command&control electronic for its vibrating systems.​

Linear feeders drives 

They are used to generate, by means of a controlled vibration, the advance of the parts inside a channel conveniently provided with the drive. Activated by an electromagnet, they require an electronic controller and (optionally) a probe to monitor and compensate the parameters of the vibration. Supply voltage is 220V 50Hz monophase. On request, they can be provided with different voltages or frequencies.​

Bowl feeders drives

They are used to generate a controlled vibration required to feed and sort the parts inside a bowl conveniently provided with the drive. Activated by an electromagnet, they require an electronic controller and (optionally) a probe to monitor and compensate the parameters of the vibration. Supply voltage is 220V 50Hz monophase. On request, they can be provided with different voltages or frequencies.​

Standard Bowls 

​They are used to mantain and orient the parts to be fed by means of Brovind circular vibrating drives.

Can be supplied as "standard", manufactured in AISI 304 stainless steel or polyamide, or as "custom", according to the needs of materials required (for example AISI 316 stainless steel) r dimensions (coil width, step etc...). They can also be covered with anti-oil or anti-wear coatings.

Standard Modular Elevators - Step Feeders

Brovind modular elevators - step feeders: examples of employment

  • Not only vibratory feeders; another way to see feeding and sorting

With its plated modular elevators, Brovind introduces a complementary technology to the vibratory feeders, thus allows Brovind the spreading of the range of possibilities to realize a feeding and sorting system.

Manufactured in vertical execution, they allows the lifting and dosing of products mantaining contained sizes and significant flow-rates; by means of reciprocating plates system, the material is collected in small quantities and lifted up to the exit point, where a linear feeder suitably manufactured feeds and sorts the parts.

They can be realized with pneumatic or motorized drive, both in "standard" and "custom" versions, for example with the possibility to modify loading capacity of the hopper or the thickness of the plates.

Motorized Elevators

BROVIND VIBRATING HOPPERS

Especially suitable to feed and pre-dose small sized parts.

They are operated by means of a Brovind linear drive, the model varying according to the size of the hopper required.

Brovind motorized hoppers

Especially suitable to feed and pre-dose small-sized parts, in particular those tha can tangle up.

They are operated by an electric motor and can be placed with an angle from 0 to 25°, according to the needs.

Depending on the product to be fed and the required slope, different belts can be used, for example flat, smooth, with plugs, in different materials.

All models are also available in AISI 316 stainless steel for food/pharmaceutical use.

​BÖLL-T​EC Automation

Stærmosevej 190

DK - 5690 Tommerup

BÖLL-TEC Automation

Store Backegatan 4

343 71 Diö

BÖLL-TEC MASKIN AB
Stærmosevej 190
5690 Tommerup
Tlf.: 31791039
CVR: 17899899
tommy@bolltec.com

BÖLL-TEC MASKIN AB

Garnisonsvägen 30

281 35 Hässleholm

Böll-tec Maskin AB Eesti

Treiali tee 2

Peetri, 75312 Harju maakond, Estland